Featured product:  Argo FA 016 off-line filter

The FA 016 is designed for filling and off-line filtration for hydraulic systems with small and medium size tanks. Fine filtration in 1 and 3 micron absolute rated is available for excellent fluid cleanliness. Clean hydraulic fluids directly relate to longer filter element life, equipment component life, and less downtime due to premature equipment failure. You don't have to wait all day to get the job done with the 5 gpm flow rate.

Performance

• We had oil analysis performed on a new sealed 5 gallon container of 32 AW hydraulic oil which resulted in An ISO Code (+2-5 micron) 19/17/12. After one pass on the FA 016 with the 1 micron, absolute rated element the analysis showed  17/14/11. The results improve with repeated passes.

• Flow rate:  5 gpm (we actually filtered a 5 gallon bucket in 45 seconds)

• Filter fineness:  Available in 1 and 3 micron absolute

Design and Function

• Compact and light for easy handling.

• Integrated oil pan for capturing fluids

• Integrated hose mounting device

• On/off switch with protection overload

• 110 volt electrical motor

• Low noise/maintenance free gear pump

• Suction hose has an integrated relief valve with mesh screen to prevent oil from flowing out and protect the pump from damage by coarse particles

• Manometer continuously indicates filter element clogging status

• Integrated pressure relief valve protects motor against damage

Technical data

• Flow rate:  5 gpm

• Suction hose:  I.D. 20 mm: 85 inch length

• Pressure hose:  I.D. 20 mm: 94.5 inch length with pipe

• Filter fineness:  Available in 1 micron and 3 micron absolute

• Hydraulic fluid type:  mineral oil and biodegradable fluids

• Electrical connection:  110 Volt/ 60 Hz

• Height: 23.6  inches

• Width:  11.8  inches  

• Depth:  15.75  inches

• Weight:  38 pounds

Home | Cross References | Vacuum Pump Filters | Air Compressor Filters | Fluid Process Filters | Hydraulic Filters | Email

Telephone: 904.695.2539 | Fax: 904.695.9766